Icon Logo Gun Mart

Beretta DT10 Scroll model

  • Review
Beretta DT10 Scroll model

The DT10 has won a considerable following with serious clay shooters and is noted for its excellent handling and shooting qualities. Richard Faulds shoots a DT10 which is quite an endorsement in itself. The gun is distinguished by cross-bolt locking (as also seen in the SO range) and a detachable trigger lock (hence the DT suffix).

A Model For All Reasons

Beretta 68 series guns are probably the most popular over and unders in the world. They come in all sorts of models. The DT10 is an evolution of the very similar and much admired old ASE and a bit more exclusive. Until quite recently, however, it did not have that many options in terms of finish, though the gun has been available in various forms to suit different disciplines for some
time. Now though, we have DT10s with game scene engraving, a DT10 in side-plated EELL form, and a DT10 with very smart scroll engraving - as tested here.

story continues below...

There are DT10s for just about every clay application - including Trap and Double Trap, Sporting and Helice (aka ZZ - whirly birds that look like the flying saucer toys that one used to get in cereal packets). The test gun, however, is a 30” Sporter and first impressions are excellent. It looks really
stylish with fine, English style, scroll on its silver-finished action. The aesthetics certainly please my jaded eye, my only comment would concern the fences of the action - which I have always thought look a little prominent on the DT10, ASE and SO guns compared to the cheaper 68 range. The reason for this, of course, is that they must accommodate a cross-bolt in the former cases.

‘Optibore’ Barrels and ‘Optima’ Chokes

The back-bored ‘Optibore’ barrels of the DT10 are monobloc are well presented. Beretta have developed monobloc manufacture more than any other gunmaker (I have seen Beretta guns circa 1900 using the system). Their barrels are the gold standard in my opinion. Those on the test gun only serve to maintain the reputation. They are perfectly straight on internal view and finished to the highest standards externally. They are also notable for being light-for-length (a great quality in a sporting or game gun if not taken to extremes) and for the fact that long, thin wall ‘Optima’ chokes are fitted.

The barrels are made from Beretta’s especially durable ‘Excelsior’ steel, a chrome-moly mix and hard chromed internally. The well machined chambers are designed for use with both 2 3/4” (70mm) and 3” (76mm) cartridges (though it is hard to imagine anyone wanting to use 3“ shells in this target-crunching gun). The barrels have wider than average bores - a feature of Optima system
guns -  both marked 18.6mm by the Italian Proof Authorities. The joining ribs are ventilated, as is the sighting rib which is flat and slightly tapered (10-8mm). It is well finished, true, and presents a good picture to the eye. There is a white bead front sight. I can’t really fault the barrels. Blacking
was excellent as well. All the ejector work was nicely assembled. 

These excellent barrels are worthy of a little more comment. Not only are they relatively light and back-bored, the forcing cones - the funnel like constrictions that lead from the chambers to the main bores - are extended. The internal barrel diameters are significantly wider than in most Berettas. 18.6mm (.734 thou) is a very sensible size, I might note - big enough to improve
patterning and felt recoil but not so wide as to cause problems with gas escape when felt wadded cartridges are used in cold conditions (although I would note that you can go to 18.7 or 18.8 - as Browning do - without great problem). The Optima chokes are colour coded (as also seen in the 682 Gold E). These are longer than the old style Beretta Mobil choke at 4” or so.

The action passes muster too. Powered by coil springs, it is well made, nicely engraved, and has excellent trigger pulls. The business of removing the trigger lock and replacing it is a bit fiddly compared to some, but it is still a very useful feature - especially in a competition gun. It allows for rapid part replacement even if one does not carry an extra lock routinely. I might also note that it is easier to remove trigger lock with barrels off because there is then no temptation to close the gun which would cause the locking mechanism to reset without the trigger unit in place (in which case one would have to go through the process of resetting mechanism).

The stock of the test gun was made from good, dense walnut. The shapes were stylish but continental. It was well finished with traditional oil - or what looked like it - and very well cut chequering. I thought the grip a bit tightly radiused, and the comb quite steep (though well profiled). My preference would be for a more classical configuration - a wider radius grip and a more parallel comb. Nevertheless, many have put similar DT10s to extremely effective competitive use. It is especially notable that many of our top lady shots have done well with them - which I put down primarily to their light frontal weight more than the stock design (though the tight radius grip may be a factor).

Shooting Impressions

DT10s come in both fixed choke and Optima-Choke form (and the Helice model has an Optima choke on the bottom barrel and a fixed choke above). I can remember when I first shot an Opti-bored DT10 noting that it threw some of the best patterns that I had ever seen. The theory of smoothing out the passage of the wad and shot down the barrel really seemed to pay dividends pattern-wise.  One seemed to get more choke effect with less constriction with the wider bore and the patterns seemed more efficient around the edges than in a conventionally bored gun. This gun has done nothing to make me change my opinion. It shoots exceptionally well. That efficient, forgiving, quality of the pattern is still there (we were testing with quarter and half choke fitted). I like the handling qualities of the gun, and even the tightly radiused grip grew on me. This is an exceptional competition tool and a pretty one as well.

PRICES: £7005 (DT10 Trident Sporter - standard gun - £4,840, Side-plated EELL £10,500)

  • Beretta DT10 Scroll model - image {image:count}

    click on image to enlarge

  • Beretta DT10 Scroll model - image {image:count}

    click on image to enlarge

  • Beretta DT10 Scroll model - image {image:count}

    click on image to enlarge

  • Beretta DT10 Scroll model - image {image:count}

    click on image to enlarge

  • Beretta DT10 Scroll model - image {image:count}

    click on image to enlarge

  • Beretta DT10 Scroll model - image {image:count}

    click on image to enlarge

  • Beretta DT10 Scroll model - image {image:count}

    click on image to enlarge

gun
features

  • Make: Beretta
  • Model: DT10L Scroll
  • Bore: 12
  • Barrel: 30"
  • Action type: Over and under with detachable trigger-lock
  • Multi choke: Yes (Optima type - 5 supplied)
  • Special features: Opti-bore barrels
  • Weight: 8lbs
Arrow