Frankford Arsenal Universal Seating Die
- 0 Comments
- Last updated: 25/08/2022
The Frankford Arsenal Universal Bullet Seating Die is a tool that can seat bullets in a variety of calibres from .224 to .338. Supplied with nine different calibre-specific bullet alignment sleeves, and 3 different bullet seating stems, the die can be used to seat bullets in several calibres instead of you having to buy a specific bullet seating die for each one. This generates a considerable saving if you reload for a few of the applicable calibres.
The die has a standard 7/8 x 14 thread which is compatible with most common presses. It also features a cut-out window in the side of the die body for easy bullet insertion and accurate alignment.
The built-in micrometre allows precise 0.001” adjustments to the bullet seating depth and once set correctly the micrometre, it does not slip out of adjustment. The bullet alignment sleeves work very well, holding the bullet precisely in place. Plus, with the different bullet seating stems you can ensure that there is no damage to the tip of the bullet.
This is a very clever tool, well made, easily adjusted and if you do load for one or more of the specific calibres catered for, it will save you money. Changing calibre is very simple and if you keep records of the correct micrometre readings for each load/calibre, then you can reset it each time you switch over to a different one. The whole thing is supplied in a good quality moulded plastic case to keep it all safe and secure.