Bore Tech Eliminator

Every time you fire your rifle carbon, lead and copper residue is deposited and if not removed will build up causing a reduction in performance. Unfortunately the task of cleaning your barrel can be somewhat arduous meaning a lot of people do not bother. This is where Bore Tech Eliminator comes in as it really makes the task easy and efficient! Available in 4oz/118ML and 16oz/473ML bottles the chemicals will remove the main deposits.

Carbon, copper, lead and the corrosive residue left behind by some cartridges are all dealt with at once. To top it off Bore Tech has insured it is environmentally safe/ non-hazardous as well as bio-degradable, barrel safe and odour free. How easy? Following this very simple procedure should ensure the long term life of your rifle, it works really well! Wet 3 to 4 patches with eliminator and push through bore to remove loose fouling. Make 10 to 15 passes with a tight fitting nylon brush saturated with eliminator.

Repeat step 1 and let it soak 3 to 5 minutes. Finally, push dry patches through the bore until they come out clean. Before storing firearm, dampen a patch and push it through the bore to prevent rust. Before use always run a dry patch through the bore to remove any residue and ensure against obstructions.