Reximex Accura

Reximex has really made inroads into the UK airgun market in the last few years, and its product catalogue now includes an intriguing mix of configurations. All PCPs, they cater for the needs and whims of enthusiasts across the board. On test here is the very latest version of the Reximex Accura, and for those familiar with the original, this model is a buddy bottle-fed system with a host of features and good looks to match.

Same but…
As I understand it from the UK distributors, Range Right, much the same specification is on offer with the latest Accura. However, the full-length barrel shroud has now been trimmed by some 4” up front. I’ll point out now that if you opt for the synthetic stocked version, you get an adjustable butt pad and a slightly lighter gun all around. Saying that, the looks and feel of the Turkish walnut woodwork win me over every time. Anyhow, it’s great that the choice exists.
As it stands, the walnut-clad Accura on test carries all the features that have made this such a desirable airgun since its introduction. The same 425cc buddy bottle is utilized, ensuring a sizeable shot count. There’s a multi-shot magazine system, dual mounting system, adjustable two-stage trigger, safety, manometer, side-lever, and even a power adjuster. Inside the box, alongside the gun, we get two magazines, a single shot tray, a filling adaptor, a bolt-on accessory rail, tools, and instructions. So, comfortingly comprehensive for those new to our game.

Fill her up
Charging the Accura is done via the Foster valve situated on the underside of the forend. Remove the crude yellow plug (surely this attractive beauty deserves better), and then snap on the airline. Initially, I did try to use the adaptor supplied but experienced a slight air leak that I couldn’t resolve. Switching to the standard Foster cable from my bottle worked straight away, so I stuck with that for the duration. Obviously, if the same thing happened after a purchase, the dealer would no doubt switch out the adaptor, so no big deal. On the subject of the fill pressure, the gun is stamped “max pressure 250bar”, so there’s your guide. However, I would only charge to 200bar, as you are placing far less stress on components over time. My test gun came charged to 230bar, so I stayed with that.
To fill the cassette-style magazine, twist the cover clockwise as per the arrow, right around against spring pressure. Next, insert the first pellet nose-first into the chamber, then a pellet into each chamber in turn as the cover slides back around.

Trigger adjustment
The trigger mechanism is adjustable, with one main adjustment specified to alter the ‘sensitivity’, or in other words, the second stage release weight. The screw for this is accessed only by removing the stock, which is a little irritating. Once set though, that will hopefully be job done, and there is plenty of further tweaking possible, given the adjustable trigger shoe. Slacken the small screw in the side, and the shoe can be rotated left or right and slid up or down around its pillar. Tighten at the desired point, and you suddenly have a perfect point-of-finger contact. Added refinement, right where we need it.

Handling and feel
Trimming the barrel shroud on this latest version means two things. Firstly, this model is obviously more compact, which is practical when shooting from a confined position. However, the downside is that the original shroud did contain a baffle system for air expansion and containment. So, unsurprisingly, this latest spec is somewhat louder. With a knurled cap masking the ½” UNF threaded muzzle, adding a silencer couldn’t be easier.
Shoulder the Accura and the stock configuration suddenly shines. Granted everything is fully ambidextrous, but someone has spent time getting this design just right. The angled and thinned-down pistol grip, complete with laser stippling, feels ultra-comfortable, and small details such as the flare at the base, all add to the experience. The extended forend is perfectly shaped to sit in the hand, plus prevents contact with the cold buddy bottle. Even with my large frame, my lead hand was perfectly supported. Look to the rear, and all excess wood is removed. The butt pad is properly concave, so grips the shoulder, and having an adjustable comb is just the icing on the cake. So, let’s look at this important feature next.

The cheek of it
Mounting a scope is easy, given that Reximex incorporates dual scope rails along the top of the receiver. Dovetail rails run inside and above the Picatinny rail, so use whichever system you wish. Overall, great design that simplifies the process at a stroke. With a scope in place, and roughly set for eye relief, it’s time to play with the adjustable cheekpiece and get eye/scope alignment just so. Where the comb is concerned, execution is a little basic, with my test gun displaying a slightly sharp edge around the cut-out, but I won’t dwell on this as it’s hard to fault the function. Just insert an Allen key into each brass-lined access point and slacken the bolts, leaving slight resistance. While in the aim and with a full sight picture, gently slide the cheekpiece up to where it applies slight pressure on the face, and then lock the bolts. Fine tune this over a few sessions and you will not regret it.

Chronograph notes
Now we are ready. In operation, the side-lever is very smooth, only requiring modest effort to pull back and set the action. The magazine is inserted into its slot from the right side, and here, I have to say it can be a bit fiddly, as it needs the moulded guide ridge to locate in a slot. Not the best design, but once in position, it cycled without a hitch.
So, with the 425cc buddy bottle filled to 230bar, we can expect a reasonable shot count. On test, I chose to monitor the first eight magazines worth, and over those initial 96 shots, the total velocity spread was just 16fps, with an average energy of 10.2ft/lbs. That’s great consistency, and whilst I’m not aware that a regulator is fitted to this model, that level of performance is hard to fault. Residual pressure was still significant thereafter, so I would expect a few hundred shots to be available. How many do we need is of course up for debate, but the Accura is clearly a versatile bit of kit.
Let’s not forget there’s also a power adjuster, so time to quickly check what difference this can make. To be honest, it made no difference on my test gun when set to the midpoint. However, when wound right down to the lowest setting, the velocity dropped to around 350fps, equating to energy in the region of 4ft/lbs. This feature could be extremely useful for those who just want hundreds of low-powered practice/fun shots on the range.

Range time
The cross-bolt manual safety is easy to nudge off with the forefinger from the right side, but its awkward positioning means it isn’t possible to reapply it with the thumb from the left side. A minor irritation, but surprising, nonetheless.
Opt to take the Accura hunting, and you may just want to fit a sling to take the strain. Here, the pre-fitted sling swivel studs make life easy. This is also the point at which to decide whether to attach the plastic Picatinny accessory rail to the forend. It’s handy for sure, but it may end up getting in the way of the supporting hand. Either way, the neatly recessed mounting hole can be utilized for other add-ons if required.
In the aim, the trigger is a real bonus, offering some creep in its movement while being pleasingly light. As for down-range performance, 3/8” groups over 30 yards proved the Accura could be a valuable tool in the field, although I would be tempted to take the single shot tray route, simply because I’m programmed that way.

Easy pick-up
In short, I warmed greatly to this Reximex Accura. The stock is a triumph and incredibly comfortable in the aim. Factor in the neat side-lever operation and all the other onboard features, and it’s not hard to see why this model holds such appeal. It has clearly got that quality where you just want to pick it up and enjoy the shooting experience, and that goes a long way. All in a gun that comes in well under the £500 mark.