REXIMEX ACCURA SYNTHETIC

Reximex continues to make a splash in the world of PCP airguns, and it’s this Turkish manufacturer’s knack for combining functionality with modern, eye-catching design that gets them noticed.

Same but very different!
On test here is a classic example of what this energetic brand is all about, and with a burgeoning feature list and a dramatic profile, we certainly look to be getting a lot of airgun for the money. I handled the walnut-stocked version a while back, but the synthetic model on test here elevates handling to new levels by virtue of the fully adjustable stock elements.
Modern airguns increasingly adopt such details, and it is thanks in part to my old friend Terry Doe and his constant banging home of the point, which has led manufacturers to take the message on board. The message is that the adjustable elements combine to allow the user to tweak and set the shooting position so the face, head, and hands all work together. Perfect eye/scope alignment, with no overstretching, straining, or muscle fatigue. The idea is that we mount the rifle, and the sight picture just falls into place effortlessly. Well, this Reximex Accura Synthetic delivers on that score, which gives it a great start in life.

Box of tricks
Alongside the gun, we get a sizable accessories box, which includes two magazines, a single-shot carrier, spare seals, a bolt-on accessory rail, Allen keys, a filling adapter, an instruction booklet, and even some targets. There’s also a printed test sheet showing a velocity string, which is encouraging.
Built as a hunting rifle, the Accura Synthetic features a sizable 425cc buddy bottle up front, meaning plenty of air and a high shot count. I like the way the front ‘barrel shroud support bracket’ doubles up as a grip for the fore-end, too, meaning it’s unlikely the lead hand will need to touch the cold bottle while aiming. In fact, there’s thoughtful design wherever you look with the Accura, including sling swivel eyelets front and back and a manual cross-bolt safety at the rear, just above the trigger.

Pre-charging
Reximex states that the maximum fill pressure is 250bar, but for most situations, 200bar is recommended simply because it offers plenty of shots and places the mechanism under somewhat less stress. The inlet valve is recessed on the underside of the action, along with a scaled-up manometer. The green section indicates the safe operating pressure, ranging from 100bar, where a refill is required, up to 250bar. Beyond this, the red high-pressure section serves as a warning. The usual advice is to go by the gauge on the charging gear, but it’s nice to have all that gun-mounted info at our fingertips. The Accura’s valve is Foster specification, and the appropriate adapter is supplied for those who need it. There’s plenty of finger access—just remove the rather crude yellow cap first.

Multi-shot
Multi-shot systems are very much in vogue, and Reximex supplies two of its brightly coloured magazines. My test gun came in .177, which gets a 14-shot drum. Opt for .22, and it’s a 12-shot. These spring-loaded, cassette-style mags are filled in the usual manner, and if properly maintained, they offer plenty of backup shots, avoiding the need to handle fiddly pellets out in the field.
So, magazine or single-shot mode? Either way, pull back the side-lever to cock the action and set the hammer and trigger. Then, slide either unit in from the right side of the breech, lining up the guide ridge with the groove in the breech. On test, I couldn’t get the moulded single-shot tray to fit, but this should be an easy fix. As for the magazine, it proved a bit snug, but it did snap into place in a satisfying manner. Close the lever, and the system is ready to cycle.

Dry-fire
Now, before a shot needs to be fired in anger, it pays to get familiar with the trigger. The good news is that the second-stage release is adjustable. The bad news is that Reximex designed it so that the stock needs to be removed to allow that adjustment. How irritating! With the stock off, the first screw forward of the trigger mechanism/visible sears is the adjustment screw. My test gun came set with a fairly light trigger, so I didn’t play with it. Outweighing the negative here is, of course, the inclusion of a match blade, and this is somewhat more user-friendly. Just slacken the screw, and it rotates and moves up and down its support pillar. Take your time, and a natural trigger-finger position will be arrived at, which all helps the cause.
Dry-firing the action during this process makes sense, which is a perk of the PCP system. At this point, though, you’ll notice that despite the fitted shroud, the relatively short barrel results in quite a blast. So, for anyone contemplating hunting, or just not annoying the neighbours for that matter, make use of the ½” UNF thread up front and fit a silencer.

Dual rails
Reximex fits its dual rail mounting system here, and I have to say it is rather refreshing, as there are no restrictions. Either use dovetail mounts on the inner dovetail rail or fit Picatinny to the outside. Indeed, the only consideration is for mounts high enough to clear the magazine.

Stock adjustments
OK, time to play to the Accura Synthetic’s strengths and spend some time getting the stock set just so. This is something that can be done safely without even firing a shot. The cheekpiece is perfectly shaped, and to alter the height, insert the correct Allen key into the hole on the right side of the stock. Next, slacken the screw and lift or lower the cheek to suit. Finally, re-tighten the screw, and you’re ready to go. On test, the screw proved a little stiff, but I got there in the end.
The butt section features a well-shaped rubber pad that provides excellent grip in the shoulder. However, unlike the wooden-stocked Accura, this pad is height-adjustable and can be lowered by up to 1.6” in five stages, as needed. It can also be raised in three stages, and when adjusted in tandem with the cheekpiece, it becomes an invaluable asset. My go-to test is the classic ‘closed-eye’ method: once you believe the stock is correctly set, mount the rifle into your shoulder with your eyes closed. Relax, then open them—the sight picture should align perfectly.
Don’t forget the small accessory rail that is supplied, which can be bolted on under the fore-end. You then have a Picatinny mounting point for a bipod. Admittedly, it sits where many will place their leading hand in the aim, which may spoil the fine handling on offer, yet it’s great to have the option.

Business end
Time to move to the range, and just before I review performance, I need to highlight the power adjuster, which features on so many Reximex models. Look to the right side of the action, and you’ll notice a small silver lever just forward of the breech. This is a simple power adjuster using the Venturi valve principle, restricting airflow. Simply set it to maximum or dial it down to lower power. Medium power makes little difference, but when set to the lowest position, expect energy around the 4ft/lbs mark. It’s a handy feature for informal practice—just set it to low, and the shot count will go through the roof. Cycling the lever takes little effort, and whilst positioning the magazine in its slot can be a bit fiddly, operation thereafter is smooth.
Back on full power, my brief was to record the first 100 shots over the chronograph to gauge consistency. From a 200bar fill on test, the first seven magazines were recorded using BSA Goldstar pellets (8.6gr). A 26fps total velocity spread over effectively 96 shots is fair performance.
Over 30 yards, using Air Arms Diabolo Field pellets, the accuracy was respectable. Plus, moving back to 40 yards, sub-5p groups proved this model has what it takes as an all-round sporting/hunting rifle. I’m truly amazed at the difference this fully adjustable synthetic stock makes over the walnut version, and given the stylish modern looks and clever technical configuration, I can’t believe I’m saying it, but it’s an easy decision. GM

Thanks to Range & Country Shooting Supplies in Sleaford, Lincs., for the kind loan of this rifle.