Icon Logo Gun Mart

Benelli Super Vinci semi auto

Benelli Super Vinci semi auto

The original Vinci caused quite a stir when it was introduced in 2009 because of its very modernistic styling and unusual take-down system (it separates into three basic ‘modules’ – barrel/receiver, trigger assembly-forend and magazine tube assembly, and the twist-off stock). It is, of course, the new semi-automatic shotgun from Benelli (a firm now owned by the Beretta corporation).

Inertia System

The range of semi-automatic guns marketed under the Benelli name do not use the gas-operated mechanism of most Beretta’s (and, indeed, most other modern semi-automatics) instead they use their own clever inertia system. It does not bleed gas off the barrel forward of the chamber in the usual manner to cycle the action, instead it operates on inertia energy.

The engineering utilises a rotating bolt head attached to the main body of the bolt by means of a short, very stiff, spring. The bolt head – which engages into keyways in the barrel in the manner of a rifle bolt – is locked and stationary at the moment the gun is fired. The main mass of the bolt behind it, however, accelerates very rapidly forward towards it. This compresses the connecting spring. When it is fully tensioned, it whacks back, unlocking the bolt head.

The Vinci also dispenses with the conventional style of return spring located in a tube located in the stock. This makes possible the interesting and innovative modular design with a detachable stock. It has a return spring though, partially concealed in the bolt, which extends back a bit (it’s about 7” in total length). The Super Vinci supplements this with a shorter second return spring behind the bolt – neither extending beyond the back of the receiver (it needs the extra one because it is intended to cope with very heavy payloads). Not to be confused with these, and the essential component of the inertia mechanism, is the connecting spring between bolt and bolt head as discussed.

On With the Rest of the Show

The hammer-forged barrel of the test Super Vinci - the Magnum model launched last year and as featured here - is chambered for 3 1/2” cartridges and Fleurs de Lys steel proofed for steel. This particular gun is not designed to fire loads less than 32 grams which is honestly stated (if you want to use 28 gram payloads consider other models in the range). The barrel meantime is well made and has some interesting features. It is stress relieved by a cryogenic freezing process. Benelli make bold claims for this, suggesting that it will reduce friction internally and stop lead and plastic residue building up (presumably because it alters the molecular structure of the metal making it less porous). Chokes on the Super Vinci, like the Vinci, are of long concealed form, and like the barrel, they are cryogenically treated too.

Although there are payload limits, the Super Vinci’s inertia system does not need adjustment within these and will handle anything from 2 ¾” 32gram loads to really heavy 64 gram 3 1/2” fodder reliability. In a live quarry gun, the system offers real benefits. It’s strong and easy to keep clean, it also makes possible a lighter weight with fewer working parts. It also allows for a repeater which is not heavy forward.

Tough and Reliable

story continues below...

This Benelli system really is tough and reliable too. There are Benelli inertia guns that have fired over half a million rounds and are still in use. It has evolved from an older falling-block pattern inertia mechanism as seen on the old Benelli 121/SL80 model (also seen briefly in the budget Beretta ES100 that was offered a couple of years back but is now discontinued). I am usually a conservative when it comes to gun design. Some of the Italian design houses in particular can get a bit carried away. The Super Vinci, like the Vinci, does look very modern indeed, but its smooth styling is appealing. More importantly, I liked the way this light (7 pound) gun handled. It feels lively in the hands – more so than many semi-automatics. It also feels like a quality piece of kit.

V-Grip and ComforTech

The test gun comes in the cheaper black synthetic option, but you can opt for Max 4 Realtree camouflage too (at slightly greater cost). There is a rubberised ‘Comfort Touch’ finish to the stock which offers excellent grip and which is also enhanced by good ergonomic shapes. The ‘V-Grip’ as Benelli call the gripping surface here, is corrugated and ‘non-slip’. It is moulded into the fore part of the stock and pistol-grip. It really does feel secure.

The Super Vinci also has a ‘ComforTech’ stock for reducing recoil. Its most intriguing feature concerns the polymer chevrons positioned diagonally across it. They help to absorb recoil as the top and bottom half of the stock move on firing. Shims are also offered for adjusting cast and drop – a very useful, real-world, feature. Equally useful, plug-in recoil pads are available in several lengths to adjust Length of Pull. Two different comb pieces are available as well to adjust comb height.

The stock attaches to the back of the action by a rather Bondesque screw-lock system (it would look quite good in a black case in the back of an Aston Martin).

Modular System

As noted, the gun does not take down into barrel, forend, and stock/action like most semis. It breaks down into modules. To take it apart, one depresses a catch at the front of the forend and turns a knob which looks like a forend securing nut but isn’t. You are left with 1) the trigger unit, forend and magazine tube in their polymer housing, and 2) a barrel and upper receiver (one extended tube-like unit) and the polymer stock. These part company in the manner of a take-down rifle built on the interrupted thread system. The Vinci barrel and receiver remain a single connected unit – permanently fixed together. The barrel on take-down also carries the bolt and related parts. This is the first semi-automatic where barrel and receiver remain a single unit on basic disassembly as far as I am aware.

Shooting Impressions

Well after all this, I was not able to shoot the Super Vinci with 3 1/2” loads. With conventional 2 ¾ 32 gram Lyalvale Supreme Game it performed well, but I did find the recoil noticeable. This is perhaps not surprising in a light weight gun – it actually tops the scales just under 7lbs.

Most of its recoil-reducing features don’t really cut in until you are using really heavy cartridges (not that I am suggesting it is going to recoil less with these). I thought the design very clever, meantime, the styling excellent, and the build quality A1. The cost is not unreasonable either for the black gun. This may be the shape of things to come, meantime, it is a very interesting, innovative, model that is radically styled but attractive nevertheless.

  • Benelli Super Vinci semi auto - image {image:count}

    click on image to enlarge

  • Benelli Super Vinci semi auto - image {image:count}

    click on image to enlarge

  • Benelli Super Vinci semi auto - image {image:count}

    click on image to enlarge

6 Comments

  • It is a self-regulating semi-automatic gun that is 46.3 in length. It has capacity of 5 and10 DM and weight is 9LBS. It has an eye-catching military appeal that is preferably used as practical shooting in dual capacities such as standard and high FAC models. I actually read about that site at https://topamericanwriters.com/writeversity-com-review/ and this will be really good and useful approach found in this site.

    Default profile image
    Gilbertoo
    01 Nov 2018 at 06:22 PM
  • It will cycle normally if you fire it.

    However, the Vinci is designed to allow you to unload the magazine without having to rack the action. Just keep tilting the multi function 'release button' backwards to release the rounds back out.

    I believe you can rack it empty the old fashioned way by holding down the lock back button in front of the trigger guard as you rack the action.

    Default profile image
    Dom H
    31 Jan 2016 at 06:11 PM
  • Yes, I know how a normal semi-auto gun works, the problem is.... Ok, I have it fully loaded, I put 4 shells in the bottom barrel/clip, then one shell in the breach to manually load it up fully. Have not shot it yet, but when I pull the receiver back to cycle it, the first shell in the loaded breach ejects, but another shell fails to take its place like I think it should.

    So, is they normal, does it only pull a round from the bottom if you are shooting it? Or should it do it even when I manually pull the bolt back to cycle while it is full loaded?

    Default profile image
    Jason B.
    29 Jan 2016 at 03:05 PM
  • It will lock by default when empty to allow loading, then you press the bolt release catch to let the action forward.

    Default profile image
    Dom H
    29 Jan 2016 at 12:09 AM
  • I just got this gun home and have not shot it yet. I noticed when I pull the bolt back it does not chamber a round. Is this normal, will it only chamber if I fire the gun?

    Thanks in advance...

    Default profile image
    Jason B.
    28 Jan 2016 at 07:38 PM
  • Very interesting modular design and they seem to handle great. The big draw back with the Vinci (and Benelli as a marque) is the length of pull is designed for midgets.

    With the longest pad fitted LOP measures 14 7/8" which just doesn't cut it for broad of shoulder Brits and other taller Northern European folk.

    If you're listening Benelli, please make some bigger stocks and I'll be first in the queue!

    Default profile image
    Dom H
    17 Feb 2013 at 04:32 AM


Arrow