Sportsmatch Arrestor/Sight Raiser Block AB3
- 0 Comments
- Last updated: 22/05/2018
There are a variety of reasons why the sight line of an airgun may need to be raised. Top British scope mount manufacturer, Sportsmatch, make several raising blocks to convert from 15mm rails to 9.5mm, or to convert from 9.5mm to Weaver/ Picatinny rails. For those who just wish to raise the sight line higher, yet maintain the same standard 9.5-11mm rails, then their AB3 specified raiser block is the answer.
Secure two AB3 blocks in position on the gun’s dovetails, and the conventional scope mounts can then be secured on top of these, raising the height of the sight line accordingly. In addition, the AB3 is a popular remedy for the phenomenon of scope creep, when used as an arrestor block. In this scenario, just fit the block to the rails of a spring piston airgun, normally just behind the front mount, and the additional pressure stops scope shift, literally in its tracks. Either way, the blocks are precisely machined, and offer an inexpensive solution for many enthusiasts, wishing to make alterations to their set-up.
Sportsmatch AB3 Arrestor/ Raiser blocks are available from all good gun-shops, but for full dealer network information or trade enquires, contact Sportsmatch directly.