Tier-One Blaser R8 Rings

Craig Coote, MD of Tier-One who make a range of scope mounts, moderators and other accessories explained: “There’s nothing wrong with the Blaser saddle mount itself, but the rings were terrible, so I thought; we can do better than that and I think we have!”

I agree, on test are their R8 TAC Rings. Made from highstrength aluminium alloy, they are cut from a single piece of material using their ‘One Hit’ process (machined from a single piece of material). At 26mm they are longer than the standard rings with six-screws per cap so apply less pressure for the same amount of grip, so kinder on the body tube. The rear unit has an integral level bubble, which is useful and they come in 0 or 20 MOA incline angle options, in both 30mm and 34mm diameters. The base is machined exactly to fit the saddle mount slot and they come with all base and ring screws and Torx drives to suit assembly. In use, they proved their promise, with superior fit and finish. The 20 MOA inclined set we tested were 100% exact, as the scope slide freely until clamped down with no eccentricity at all!

PRICES:
30mm 0 MOA
£165; 34mm 0 MOA £175;
30mm 20 MOA £175;
34mm 20 MOA £185

CONTACT: 01924 404 312, www.tier-one.eu