Icon Logo Gun Mart

TET Blaser Picatinny Rail

TET Blaser Picatinny Rail

Want a bit more flexibility for scope mounting on your Blaser then TET has the answer.

story continues below...

The dictatorial nature of some makes of switch barrel rifle means dedicated mounts, which can be a bit limiting given scope size and type as to ring spacing’s/height etc. Conversely you might want to mount a red dot for close range work. Third Eye Tactical seem to have a solution for the Blaser R93/R8 with their R93 rail.
This consists of a 6.5” Picatinny base in this case with a 20 MOA down angle built in to accommodate those who might want to get more elevation for longer shots. The beauty of the system is that it uses Blaser’s existing QD base with locking side levers. The scope rings just screw to this using 2 x T20 Torx screws and the TET base makes use of these. It only fits one way as the rear of the rail overhangs the action, which does not interfere with ejection, though it does cut down on magazine/breach access a little.

Though it will allow a good deal of flexibility for fitting larger or even Intermediate Eye Relief (IER) optics the other obvious choice is as a base for a red dot sight if you are into driven game hunting. Typically well made and presented as we have come to expect from Third Eye Tactical, for R93/R8 users it’s a practical and cost effective accessory.

The TET Blaser R93 20 MOA Picatinny rail is available at £65 from EVO Leisure Ltd, call 01924 404312.

  • TET Blaser Picatinny Rail - image {image:count}

    click on image to enlarge

  • TET Blaser Picatinny Rail - image {image:count}

    click on image to enlarge

Arrow