Allen Eliminator Connected Shooting Rest

Allen’s Eliminator gun rest is a two-part forend/ buttstock rest that folds together and clips in place for transit. At 2.79kg overall weight, both parts have non-slip undersides suitable for soft or hard surfaces with a firm, bead-filled Z-notch profile on each, giving full-length stability for zeroing and practise with your rifle, and no possibility of forgetting either end of the equation.

Strong Cordura forms the lower halves in dull green with black upper polygonal shapes of a harder synthetic with a gently webbed surface; both are pre-filled with inert polymer beads. Overall size when coupled is 280 x 130 x 190mm that extends to 70cm to support your rifle with a front height to the base of the V at 150mm, the rear wedge sloping from 90 down to 60mm from the bench. This matches the underside of most sporting rifle gunstocks but be aware of height requirements. A slight fore-aft movement will subtly alter elevation on target, before a regular hold is available from your benchrested position and the two halves can be closed toward each other for greater elevation on target.